Marine Battery Introduction
Marine Battery Specifications
Marine Battery Comparisons
Marine Battery Graphs
Marine Battery Frequently Asked Questions
Custom Marine Battery Wire Assemblies
LIFELINE DEEP CYCLE PREMIUM SEALED MARINE BATTERIES
Featuring AGM Absorbed Glass Mat Technology
 AGM TECHNOLOGY - THE DIFFERENCE
Some of the main differences between the old vented lead acid batteries and the LIFELIINE AGM valve regulated sealed lead acid batteries are:
Non-Spillable: The electrolyte is absorbed in a glass mat (AGM) separator in the LIFELINE and it is spillable in the flooded or vented type.
The cells have pressure relief valves in the LIFELINE that are designed to keep positive pressure in each cell. The older vented or flooded type battery cells are open to atmosphere through the vent cap holes (should the vented battery be tilted or inverted, the result can be electrolyte (sulfuric acid/water mixture) spilled all over your equipment, a highly corrosive and potentially dangerous condition).
The cell groups in the old vented type batteries are loosely packed and thus have high plate separation. In contract, the LIFELINE AGM marine battery has every square inch of positive and negative plate material tightly packed and compressed with the AGM and supported by the walls of each cell. With this type of construction, LIFELINEs offer much lower internal resistance ... greater starting power (particularly in cold temperature) ... and a much higher degree of protection against shock and vibration than the old flooded type.
Marine Battery Specifications
Marine, Boat, and RV Battery Chargers
Advanced Power Products also supplies a full line of battery chargers to augment the marine and boat batteries that we sell. We supply a full line of chargers, both portable and full size models, to ensure that your batteries are ready to go every time.
Click here for our Chargers and Accessories
|
|
